Browsing Tag

kids bedroom

House Progress

Spring One Room Challenge Week Three: Trim Finishes and COLOR

Three weeks in and I’m starting to feel like I can *see* this room. (If you haven’t caught up on weeks one and two, you may want to do that first.) You know when you still have so much left to do, but all of a sudden there’s a point in a project where you can start to see your vision come to life? That’s where I am this week.

We finished last week with beadboard up on the wall and that was it. I had to do a lot of work to actually finish out the beadboard so it looked good, and even more to do before I could start getting paint on the wall, but I was determined to start getting color on this week. Thankfully Ethan was home this week and able to help me. I wouldn’t have gotten as much done as I did without him, but we made it with not a moment to spare!

Let’s walk through what we did this week.

First thing we did was add the chair rail to sit along the top of the beadboard. It immediately looks so much more professional with just that simple addition. It’s easy to gloss over all of the finish work, but it takes hours to fill nail holes, sand, caulk seams, and clean up in between each of those steps, so I don’t want to negate that work.

Once we completely finished the beadboard, we were ready to install picture rail. A lot of people don’t know what picture rail is, and if you had asked me a few years ago, I wouldn’t have known either. Picture rail is a type of decorative molding somewhere near the ceiling. Sometimes it’s installed right up close to the ceiling, mimicking the look of crown molding, and other times it’s installed 10-12 inches down on the wall. It’s most common in historic homes and in art museums. The profile of the rail or molding is round, and the purpose is to hang a round hook from the top to be able to hang and display art. In older homes it was common to have plaster walls, which are notoriously difficult to hang things from. Enter the solution. You can easily hang things without any nails, screws, etc. It’s super practical!

Since our second floor has nine foot ceilings, we decided to install it a little bit down on the wall, and our laser level came in handy…for demonstrating once again how nothing in this house is actually straight. If you look closely above the window you can see how the top of the window does not line up with the laser. Thankfully once I hang curtains you won’t be able to tell. Remember that because this room is totally crooked, I’m trying to give the illusion of straight visual lines.

So picture rail was hung (that was 100% Ethan, all I did was stand back and make sure it was lined up and pass the nail gun), caulked, wood filled, and sanded. I am so glad we added this, it is definitely in keeping with the historic feel of our home, and definitely helps with the traditional style I’m going for in this room. I also primed all the walls that had been floated last week.

Then, my dear friends, it was time to start painting. I don’t usually do this, and certainly can’t recommend this, but I did not want to waste time with painting different samples on the walls, so I picked straight from the chip and oh.my.gosh. I am in love.

This is after just one coat of Behr Equestrian Green (we love to see a paint color name on theme!). I did paint a second coat since this photo was taken. It’s my first time painting a colored ceiling and I’m wishing I had done it sooner! I also decided to extend the color on the wall above the picture rail as well, which I’m really pleased with.

So, that’s the update. The next weeks will be painting myself into oblivion, as there is so much painting yet to do, but I’m really excited to keep you posted. Make sure you check out the other bloggers who are doing the One Room Challenge, things are starting to get really good! That’s it for today, have a fabulous day!

House Progress

Spring One Room Challenge Week Two: Old House Challenges

I can’t believe we are already onto the second week of the One Room Challenge! If you missed last week’s post with the design plan for the space, be sure to check it out here. I have been hard at work this week, feeling both frustrated and excited.

My first task was to float the walls along the upper section of the room with joint compound. This room has an “orange peel” texture that’s pretty common in homes here in the south, as well as in new construction. It’s not appropriate in a historic home, and I personally just don’t like the look of it, so I decided to smooth it out. It requires a large putty knife and lightweight joint compound, and it’s akin to frosting a large cake.

Once it’s applied I had to sand, which was a serious arm workout. It’s an underestimated task to be sure, but it’s not technically difficult.

Then came the head scratchingly difficult part. In typical old house style, the room is completely unlevel. The floor on one side of the room is two inches higher than the other side, making the entire wall slanted. I wanted to add beadboard to the lower portion of my wall, but it wasn’t as simple as measuring the height from the floor up and making straight cut across. I wanted to give the illusion of a straight line, so that meant each piece had to be cut at a slight angle. I don’t know if this is even making sense. It barely made sense to me. I purchased a laser level, and it was my saving grace for installing these beadboard panels at a straight-looking-but-not-actually-straight height.

For the first portion of the week, Ethan was out of town working, so I was attempting to figure out how to get everything installed correctly by myself. Needless to say, once he returned from his trip and was able to help me, things went a lot more smoothly.

We finished up the beadboard late last night, and although it’s not pretty progress, I do think it will be the most laborious and difficult part of the process, so I’m glad to have it checked off the list during the first week.

Next, I will need to fill nail holes and sand the beadboard to prep it for paint, then install the chair rail that will sit on top of the beadboard, and the picture rail that will sit higher up on the wall. Those will hopefully go much quicker than my beadboard install (and I really hope I don’t come back next week completely regretting these words)!

Now, I have to get back to work, but be sure to check out some other projects being completed this season over on the One Room Challenge Blog. There are some projects that I really can’t wait to see come to life! That’s it for today, friends. Have a fabulous day!